Oven, Range & Stove Repair in Northern Virginia
Oven never gets up to temperature? A burner that clicks but won't light, an element that stays cold, or an error on the control panel? Share your ZIP, the model, and whether it is gas, electric or induction.

Don't light burners or use switches. Leave the home and call your gas company's emergency line or 911 from outside.
Why isn't my oven reaching the set temperature?
When an oven preheats slowly or never gets hot enough, the cause is usually a worn igniter on a gas oven, a failed bake or broil element on an electric oven, or a temperature sensor that is reading wrong.
Tell us the setting you used, whether bake, broil or both are affected, and roughly how long preheating takes now. For a cooktop, note which burners or zones fail and whether the range is gas, electric or induction.
The fuel type changes the whole diagnosis
That is why we ask before we come. Here is what we look at, and what helps us most from you.
Gas ranges & ovens
Ignition and gas flow
- Burner clicks, won't light: note which burner and whether the cap was just cleaned
- Oven slow to heat: tell us how long preheating takes now
- Flame looks uneven or yellow: mention it, and never adjust gas parts yourself
Electric ranges & ovens
Elements, switches and controls
- Element stays cold: say which one, and whether it glows at all
- Bake works, broil doesn't (or the reverse): that detail narrows it fast
- Panel error: write the code exactly as shown
Induction cooktops
Electronics and cookware detection
- Zone won't start: try a pan you know is induction-ready first
- Flashing symbol or code: note it and which zone shows it
- Clicking or buzzing: a short recording helps
Four quick checks worth a minute
Control lock
Make sure the lock or Sabbath mode is off.
Clock set
Some ovens will not heat until the clock is set after a power cut.
Breaker
On electric ranges, check the breaker has not tripped.
Burner cap
After cleaning, the cap must sit flat and centered on the gas burner.
Door locked after self-clean? Let the oven cool completely; many doors only release once cool. If it stays locked, book a visit rather than forcing it. Leave panels and gas connections to a technician.
How an oven repair visit goes
Have ready when you call
Service ZIP · brand · gas, electric or induction · freestanding, slide-in or wall oven · which burner, element or setting fails · any error code · a callback number. The model label is often inside the oven door frame or the storage drawer.
Address and fee confirmed
We check your address and tell you the diagnostic fee for your area, $100 to $150.
Heat and ignition checked
The technician tests temperature, ignition or elements, and controls for your model.
Quote in writing
Parts, labor and total before any work. Approve it and the visit fee is waived.
Tested with you
We confirm it heats before we leave. Parts carry the manufacturer's warranty where one applies.
Oven and range questions
My igniter clicks but the burner won't light. Is that dangerous?
Turn the burner off. If you smell gas, leave the home and call your gas company from outside. If not, book a visit and stop retrying it.
Do you repair wall ovens and cooktops?
Yes, along with freestanding and slide-in ranges. Tell us the type and brand so we can confirm parts.
Can you fix induction cooktops?
Yes. Mention the brand and the code or symbol shown, and which zone is affected.
How much is the visit?
$100 to $150 depending on your area. It is waived if you approve the repair.
Get dinner back on the stove
Send your ZIP, the fuel type and what is not working. We call back with the visit fee and the first open time.
